UNIVERSAL 12V 1.0AH CHARGER
The 12BC1000D-1 charger begins it’s charge cycle on “fast-charge”, providing the
battery with constant voltage of 15VDC, and regulated
current of 1000mA. This charge
cycle is indicated by the red LED. As the charging cycle progresses, the terminal voltage
of the battery
will rise to an eventual 15VDC. At this point, the charger senses this
voltage, and the fast-charge circuit cuts-off, also turning
off the red LED. The “floatcharge”
circuit then comes on along with the green LED, providing the battery with a
constant voltage of
13.8VDC. This voltage can be left on the battery indefinitely without
damage, and keeps the battery fully charged, ready for use at
Voltage 120VAC, 60Hz, +/- 15V
Exciting Current 60mA
PRIMARY Rated Input Power 25VA
DC Resistance 40 ohms +/- 10%
Voltage 13.6-13.8Vdc 14.8-15VDC
Current 50mA 1100mA Max.
INSULATION Primary-Secondary 100M ohm @ 500Vdc
100M ohm @ 500Vdc
Primary-Secondary 1500Vac for 1 min.
DIELECTRIC Primary-Core 1500Vac for 1 min.
STRENGTH Secondary-Core 1500Vac for
TEMPERATURE Max. 75 Degree C @ rated load
RED LED “on”: Charger is in “CHARGING” mode.
GREEN LED “on” Battery is charged for
use, and the “float” charge is operating.